Analogue short range, robust and long range and digital types

Analogue and digital

Full sales, spare parts and accessories, support, installation and training

Ideal for workshops, machine shops and general industry.


These lever-type dial test indicators are especially intended for use on the shop floor or in the inspection room – Ideally suited for comparative measurements on a surface plate, for instance – Determine form, shape and position deviations as well as axial and runout errors.
• Bidirectional measuring with automatic reversal inside the movement.
• Continuous clockwise pointer rotation providing error-free reading.
• Insensitive to magnetic fields.
• Jewelled movement with 7 rubies.
• Ball-bearing lever system. Measuring insert swivelling through to 240°.
• Very low measuring force.
• Exceptionally robust with full-metal construction.
Instrument Sets with Small Support
Instrument Sets with Small Support

Very large measuring span – Ideal for inspecting all significant size variations, e.g. on the surface plate – Measures position, form and shape errors.
• Safe reading thanks to secondary pointer totalling the number of revolutions made by the main pointer.
• Bidirectional measuring with automatic reversal within the movement.
• Pointer rotation direction is always constant due to automatic reversal effect.
• Jewelled movement with rubies.
• Ball-bearing lever system. Measuring insert swivelling through 210°.
• Particularly robust due to full-metal construction.
• Monobloc housing with mounting through dovetail clamping and a Ø 4 mm swivelling shank.


  • INTERAPID 312 Series, Standard Models
  • INTERAPID 312 Series, Perpendicular Models
  • Dial Indicator Sets, INTERAPID 312 Series and Standard Models

Essential for the workshop, but also in the inspection room or measuring laboratory – Ideal for comparative measurement on a surface plate – Detect form and position errors – Measure axial and radial runouts, especially. Technical Features • Long measuring travel, up to 3 mm. • Bidirectional measuring, without reversing lever. • Same rotation direction of pointers in the two measuring directions (clockwise pointer direction). • Swivelling probe through 180°. • Main pivot on self-aligning angular bearings, dimensioned oversize. • Dovetail mounting machined in the indicator housing.. • Dull chrome-plated bezel and housing. • Rotating dial. • Insensitive to magnetic fields generated in mechanical workshops.


  • COMPAC 210 Series, Standard Models
  • COMPAC 220 Series, Perpendicular Models and
  • COMPAC 230 Series, Lateral Models