WENZEL Horizontal Arm CMMs
Ideal for checking large items such as full car bodies.
Flexible and adaptable, WENZEL horizontal arm CMMs
WENZEL horizontal arm CMMs models include:
- Roller Bearing Side (RS),
- Roller on Base Plate (RA)
- Roller at Floor Level (RAF)
- Roller on Base Plate, extra large series (RAX)
- Roller under floor (RUF)
The universally applicable RS (Roller Bearing-Side) stand-alone measuring device with guide elements attached to the side of the base plate can be easily integrated into existing room concepts.
Characteristics for the RA (roller bearing on the base plate) / RAF (roller bearing on guide beam) coordinate measuring machines are the floor-level base plates on which the guide systems are mounted. Due to this design, the CMM can easily be equipped with heavy components up to complete vehicles.
The RAX measuring machine (roller bearing on the base plate, XL measuring range) with its far above-average measuring range was specially developed for the needs of the automotive industry.
The RUF underfloor measuring machine is the ideal complement to the measuring centres when workpieces also need to be measured from below.
To extend the Y-measuring range, all coordinate measuring machines can be supplied in a duplex arrangement.
More on WENZEL horizontal arm CMMs
WENZEL horizontal arm CMMs are the ideal choice when, for example, sheet metal parts are to be inspected in the automotive, aerospace or mechanical engineering, and railroad industries. Large-volume and complex components are no problem in front of the horizontal arm measuring machines. The open design of the coordinate measuring machines enables optimum accessibility.
The RA series CMMs are installed on the floor-level base plate in which the guiding system is integrated. This design allows the coordinate measuring machine to be easily fitted with large and heavy components such as complete vehicles. The horizontal arm CMM combines mechanical accuracy with high reliability and convinces with an open structure for best accessibility.
The machine concept of the RS-measuring machines is based on a stable base plate as a measuring table with a laterally mounted guide system. The horizontal arm CMM can be integrated into an existing room concept in a highly flexible manner without a specific foundation. If required, the coordinate measuring machine can be moved to a new location at relatively short notice.
The RAX is the WENZEL horizontal arm CMMs, which offers the largest measuring range. The coordinate measuring machine is often used for fast and precise measurement of large-volume components such as car and commercial vehicle bodies or machine parts. The CMM was developed for production readiness in cooperation with a leading automotive manufacturer.
Wenzel Bridge CMMs
WENZEL’s range of bridge CMMs includes the XO and LH models in a range of sizes from the small XO55 to the very large LH3020 and three accuracy grades of Standard, Premium and Premium Select.
Wenzel Gantry CMMs
The WENZEL LH Series Gantry CMMs have been specially designed to inspect large-volume and heavy workpieces. The raised guides in the Y-axis also ensure maximum stability and rigidity, even with dynamic movements.
Wenzel Quartis Software
For WENZEL CMMs we recommend the use of WM | Quartis software. This has been specially developed by the WENZEL software team for their range high-quality of CMMs.
For more information on any of our products or services or a quote, please fill in the online inquiry form below for a fast response – within 24 hours.
84 Hotham Street Preston VIC. 3072 Australia
Open Office Hours
M-F: 8am – 6pm
Get in Touch
1300 363 409